Manfrotto MT190XPRO3 Aluminum Tripod Kit with MHXPRO-BHQ2 XPRO Ball Head

This kit pairs the Manfrotto MT190XPRO3 Aluminum Tripod with the MHXPRO-BHQ2 XPRO Ball Head featuring the 200PL Quick Release System. The tripod extends to 67.5", folds down to 27.7", and weighs 5.5 lb, with a load capacity of 33 lb.

The tripod's Quick Power Lock system enables easy extension of the three-section legs with just one hand. The rapid center column can be positioned vertically or swung horizontally like a boom. When set to the 90 degree position and with the legs at their widest angle, the tripod can place your camera just 8.3" from the ground, ideal for macro or low-angle shots. A built-in Easy Link plug lets you attach Manfrotto's flexible or articulated arms to hold lights or reflectors. A rotating bubble level just below the head ensures visibility from any angle.

The MHXPRO-BHQ2 XPRO Ball Head is strong and well-suited for this robust tripod. It features separate knobs for fine-tuning the ball and 360 degree panning adjustments, along with a friction control knob for precise placement. The 200PL quick release clamp and plate make attaching and removing your camera quick and easy, while two bubble levels help ensure a level horizon. A numbered scale around the base of the head simplifies precise, repeatable pans.

The redesigned MT190XPRO3 Aluminum Tripod from Manfrotto continues the success of the 190 series with improved hardware and user-friendly features. Setting up is quicker thanks to the Quick Power Lock System, which allows for one-handed leg extension. The rapid center column can be adjusted vertically or swung horizontally into a boom position with the 90° Column feature. The enlarged leg angle selectors allow for a minimum height of 3.5" for macro photography. The Easy Link plug on the tripod spider allows for adding flexible arms to hold lights or reflectors.

Other convenience features include rubber leg warmers for cold or wet weather, and a rotating bubble level for easy viewing from any tripod position. With its functional design, the MT190XPRO3 is not only a practical tool but also visually appealing.

The XPRO Magnesium Ball Head from Manfrotto features an integrated RC2 quick release cam lock and a 200PL-14 Quick Release Plate. Plates like the 200PL-14 can be quickly removed by pulling the spring-loaded lever on the cam lock, which also allows for fast reattachment. The cam lock includes a safety catch to prevent accidental detachment of the plate.

With a 33.1 lb load capacity, the XPRO Magnesium Ball Head can be attached to any tripod or support system with a 3/8"-16 mount. The ball-and-socket joint can be easily adjusted in any direction by loosening the primary locking knob. A secondary knob controls 360° rotation, and an additional knob adjusts the tension for smoother movement.

The 200PL-14 Quick Release Plate is compatible with cameras or accessories that have a 1/4"-20 mount. It features a non-slip, rubberized surface and measures 1.7 x 2.1 x 0.4".